Laser Machines

5 things you need to know to start laser cutting

Ever imagined running your own laser cutter? Here are five tips to get you started cutting patterns into everyday stuff like wood or newspaper. Laser reducing – sometimes called etching or engraving – isn’t just one of the coolest means of bringing a design to life but also, by far, the most appropriate. While it might be easy to create and slice out a small sign yourself, a laser cutter can do a lot more, like the kind of multi-layered lettering and design that a good skilled designer would struggle to execute.

What laser must I get?

Between co2 laser cutter, extractor lover and sourced materials used to build the rig, Roe said that it cost someplace in the region of EUR8,000 to create, whereas store-bought laser cutters from places like Epilog will cost you somewhere in the region of EUR20,000. This might seem like a cost the average beginner would balk at, but dread much less cheap alternatives exist. Starting out a little smaller, there are a number of 40W laser cutters available directly from eBay.

Where do I source the equipment to develop one?

Following Tog’s example, your one-stop shop is an online site called Lasersaur that offers people an open-source shopping list for building your own laser cutter. It also carries a step-by-step guide in developing one if you are beginning with scuff with little-to-no experience. It really is then simply a case of investing in the hours into sourcing the necessary parts. In cases like this, eBay will be your go-to place where parts can be shipped set for a small fraction of the price of buying locally, in many cases.

What materials do I use for laser slicing?

It might seem to be obvious, but you can’t just decide on any old materials and start blasting it with a co2 laser cutter. Also, it is advised to stay away from cardboard as the concentrated, intense heat can cause it to catch fire very easily and, when coping with electrical equipment, trying to put it out becomes that bit more complicated.

Among the better materials to make use of are the cheap and readily available birch plywood only a few millimeters dense. With this, a straightforward design can be etched out in just over one minute. Check here.

What must I make first?

When it comes to sourcing some cool designs to start out with, the internet is your friend. It is as easy as typing ‘SVG designs’ into Google and finding one you truly like. Along with SVG documents, the other laser beam cutter-friendly record type is DXF, which can even be put into a laser cutter software programmed to print as is or put into if you feel creative.

The easiest thing, Roe said, is to start out off with a vanity plate of your own name that you could hang up in your cubicle or on your wall structure at home.


Is there everywhere I can get some good guidance? While there are a variety of handy lessons on YouTube, Tog itself offers a hands-on experience using its co2 laser cutter.

Please follow and like us:
Continue Reading
Laser Machines

Laser Cutting Vs. Waterjet Cutting

When it comes to laser cutting versus waterjet cutting, there are numerous debates. The fact is that both options have their own level of advantages that they can provide the user. But having said that, you should know what is best for you before starting a job. Whether you do not, you can end up with under average results or pay more money than you should. Therefore, to avoid this, knowing the advantages of both cutting methods will save you long-term time.

Waterjet Cutting Technology

When it comes to cutting metal, there are several ways to complete the task. Several are as easy and rough as a hacksaw. Others are more technical, such as laser and plasma cutting tools. The drawback of all these is that there are disadvantages. These range from the heat that reasons deformities along the cutting line to the rough and neglected edges that remain. This is where the cut by waterjet intervenes. This method has several advantages over others and now I will explain those advantages.

  • No Heat

Unlike other methods, waterjet cutting doesn’t make the heat they produce. This means that it does not melt, distort or deform along the edges that help when trying to make precise cuts for complex pieces.

  • Precision

Waterjet cutting devices can have amazing accuracy. This technology offers the possibility of making precision cuts with tolerances of up to ± 0.005. “Currently, this is not cheap, since the more precise the cost in the configuration of the cutter and the materials needed to make a precise cut but it is doable.

  • Clean Up and Time

Another good advantage of this technology is cleaning. As it does not leave scum and there is little or no burr on the parts. There is little required for cleaning or secondary finishing operations like sanding or grinding. This prepares the cuts to move faster and lets jobs to be completed quicker than with other technologies. Learn more.

Laser Cutting Technology

This is a technology that uses a laser beam to cut precise patterns in all kinds of materials such as plastic, metal, and paper. It is a type of subtractive manufacturing process that cuts a portion of digital design into another piece of sheet material. The laser cutting process is described as well as the direction of an efficient high-power laser in the material that leaves a polished edge with a high-quality finish.

Valuable Benefits of Laser Cutting

This technology is an advanced procedure that produces ideal virtual cuts at any shape and angle with the assist of materials fragmented by cutting tools. Below are some of the benefits of this technology:

  • Very sharp edge definition
  • Flat blade cutting
  • Ability to cut corners, 3-dimensional shapes, complex holes and slots that have high repeatability
  • Five-axis and six-axis laser control
  • Ultra low distortion
  • Fine cutting width
  • Minimum cutting width
  • Zero variations due to wear of the tool
  • Cutting lubricants are not required
  • Low thermal input
  • Narrow zone affected by heat
  • No mechanical force in the workpiece

Which Cutting Method Works Best?

The best cutting method depends to a large extent on the required capacities. If a job involves a piece of metal 1 ” less or thick and requires moderate to exacting tolerances, not anything beats a laser cutter. If a workpiece is prepared of an exotic material that has low heat tolerance, then it is likely that a waterjet is your best choice. If the material is metallic and very thick and speed is critical, then plasma cutting would be the best. Learn more details at:

Please follow and like us:
Continue Reading
Laser Machines

Everyday Shoe Comfort for Technicians

Shoe Comfort

To perform at their best, technicians need to wear comfortable clothes and the most comfortable shoes. Choosing shoes for work in labs and factories should include durability as well.  Here is what to look for when selecting shoes for technical work.

Sturdy Soles

Good, comfortable shoes with strong soles lets the most dedicated technicians stand for long periods of time without aching feet. Select treads that will also prevent slipping as some slick floors in labs can be hazardous. Technicians also spend hours on their feet walking around plants and going to meetings. Shoes for walking are ideal for most anyone involved in the technology industry. Try The Walking Company for a variety of styles and shoes with perfect soles for standing and walking.

Quality Uppers

Canvas or leather uppers are rugged enough for protecting feet while working with tools. Yet canvas and leather also provides supple contours to maintain comfort throughout the day. Choose a material that is not so stiff that it causes discomfort, yet so soft that it offers no protection. A sublet blend of safety and comfort is key.

Secure Fit

Ill-fitting shoes are the most common cause of foot problems. If a shoe is too loose, then calluses and blisters will develop over time. Tight-fitting shoes are also problematic, as they cause strain on the foot and aches and pains will haunt you later. Get your foot measured before selecting shoes so you know the right size, exactly. Too often, people just try shoes looking for comfort entirely, when the proper fit is the basis for a perfect fit in footwear.  You can also customize the material of the shoes. Look at how this laser cutter engraves denim.

Choosing the Best Shoes on a Budget

Low-budget shoes can be affordable but can come with all the issues of a poorly made shoe. Cheap shoes can fall apart, fit badly and provide little comfort. You can still save on high quality shoes without spending lots of money. Use this special tech discount from The Walking Company and save on shoes that offer the proper fit, lasting protection and provide the most comfort while standing or walking throughout a technician’s long day.

Please follow and like us:
Continue Reading
Laser Machines

How Do CO2 Lasers Work?

A CO2 laser tube is a kind of gas laser. In this device, electricity is told you a gas-filled tube, producing light. The ends of the pipe are mirrors; one of which is completely reflective and the other which let us some light through. The gas concoction is made up of carbon dioxide, nitrogen, hydrogen and helium. The light produced by CO2 laser cutter is invisible, dropping in the very far infrared selection of the light spectrum.


When activated by an electric current, nitrogen substances in the gas combination become excited, signifying they gain energy. Nitrogen can be used because it can hold this exciting point out for extended periods of time without discharging the energy in the form of photons, or light. The high-energy vibrations of the nitrogen subsequently excite the carbon dioxide molecules. At this time, the laser achieves circumstances called populace inversion, the point where something has more fired up contaminants than non-excited ones. For the laser beam to make a co2 laser cutter, the nitrogen atoms must lose their fired up state by releasing energy in the form of photons. This happens when the thrilled nitrogen atoms contact the very frigid helium atoms, which in turn causes the nitrogen to release light. Epilog has I think the best machine right now.   But, to find laser company reviews look at these Boss Laser customer reviews.


The light produced is very powerful in comparison to normal light because the tube of gases is ornamented by mirrors, which mirrorsmost of the light visiting through the tube. This representation of light triggers the light waves being produced by the nitrogen to make in intensity. The light rises as it vacations back and forth through the tube, only developing after becoming smart enough to feed the partially-reflective reflection.


Light from a co2 laser cutter is powerful enough to trim many materials, including cloth, wood and newspaper; the most powerful CO2 lasers are being used for machining material and other metals. Although highest-powered CO2 lasers stepped on 1,000 W, those used for machining are usually between 25 and 100 W; by comparison, laser suggestions are a few thousandths of any watt. Because it is in the infrared, they have an extremely long wavelength, around 10.6 micrometres; it is much longer than noticeable light, which operates between about 450 and 700 nanometers. As constant lasers go, the CO2 type is the most effective in production.

On the co2 laser cutter, the laser cutting brain is moved above the metal plate in the condition of the required part, thus lowering the part from the dish. A capacitive height control system preserves a very accurate distance between your end of the nozzle and the dish that has been trim. This distance is important, since it determines where the centre point is relative to the surface of the plate. Slice quality can be influenced by boosting or minimising the centre point from right above the surface of the dish, at the top, or maybe below the surface. Here is a pretty good laser company review to check out:

There are lots of, many other parameters that affect minimise quality as well, however, when all are handledcorrectly, the co2 laser cutter is a well balanced, reliable, and incredibly accurate clipping process.

Please follow and like us:
Continue Reading
Laser Machines

Use Laser Engraving To Identify GMO Foods

Should you use a co2 laser tube when it comes to engraving GMO foods? Probably sounds like an odd way to discover this type of food.  Is it necessary to identify GMO foods? For most people they don’t know what GMO foods are and don’t ever consider laser engraving them. GMO is simply Genetically Modified Organisms that are not found in nature.  In other words scientists and engineers have to get involved.  However, genetically modified foods can be very different from what you might initially expect as they are grown in a modified state. I guess for some, they don’t like the sound of that. It has become very important and necessary to identify GMO foods; so, why use a laser engraver to do just that? visit us here!

Why Should You Use A Laser Engraver?

First and foremost, you need to identify GMO foods. How can you tell just by looking at them? You can’t in all honesty and that is one major reason why to use a laser engraver to identify GMO foods. What is more, when you use the engraver or laser machine you can find it’s a lot easier to use than you think and it’s very effective. You do not need to go overboard in terms of creating labels or other such identifying boards, you can create a simple label. There has never been a better time to engrave GMO foods.

You need to know what you’re eating

When you consume food, you want to know what you’re eating, right? You might not think so but it’s important to know the differences between GMO foods and non-GMO foods. It can be a make difference in terms of what you eat and what you feel comfortable eating so it’s necessary to create some labels. You can use a co2 laser tube and engraver to create the labels with ease and at least then you’ll know what you’re eating. read the right news from

Laser Engraving Makes Light Work of Labeling

A laser machine can be an excellent tool when it comes to creating some fun labels. You can have a lot of fun and it’s really easy to do. You’ll find laser engraving machines make light work of labeling and it’ll be a fast process too. A lot of people think using a laser engraving machine to be a lot of hard work and a very time-consuming process when in reality it isn’t. These machines are easy to use and very fast so you shouldn’t have too much trouble with them. You are going to love these machines and love how simple they are.  You can find reviews of Boss Laser on Twitter if your looking for a laser cutting company.

Use an Engraver Today

To be honest, laser engraving tools are not as costly as you would think and they have become far more cost-effective. That is a great and certainly one of the very best reasons to create a label for the foods. You can absolutely get a simpler way to identify GMO foods and you will find it’s far more effective. You should give a lot of thought and consideration to labeling GMO foods and it’s far easier than you’d think. There has never been a better time to use a laser engraver to create a label or some sort of identification mark to identify GMO foods. A co2 laser tube can be great and you shouldn’t have any trouble whatsoever. Why not use it?

Please follow and like us:
Continue Reading
Laser Machines

How You Can Create Labels for GMO Foods

An affordable hobby laser can be one of the very best tools to help create labels for GMO foods. Genetically modified foods have become very popular over the last few years but there are many who do not want to consume them. Creating labels can be important so that you can differentiate between the two. However, how can you create labels for GMO foods? Read on to find out more information.

Design a Label on Paper

First of all, you want to create a simple label that is noticeable but not over-the-top or too big. You should consider drawing some ideas down on paper first so that you can see a variety of designs and find one you actually like. You don’t want to create several labels only to find you don’t like them or they aren’t suitable for the products and start all over as it’s a waste of time and money. So, draw some designs first and decide on the ones you want before you use the laser machine.

Create a Suitable Work Space for the Cutting and Engraving

As said, laser machines and engravers are ideal for the job but in order to use them effectively you must have a working space available. If you have a garage available, it can be ideal to set the machine up. It shouldn’t take more than five minutes in total to set the machine up and once you do, run through some simple safety checks. After you have done all of this, you can then go ahead and use the machine to create labels. You can create as many as you like just ensure you take a little break after a few so that you don’t get cramp in your hand and allow you time to take a breather too. A hobby laser can also get very hot so you want to ensure you have good ventilation within the area you’re working in.

Take Your Time When Crafting Labels

A laser machine has to be one of the most effective methods when it comes to creating labels for GMO foods and you shouldn’t have too much trouble with them either. However, when you are using these machines for the first time, you need to ensure you take your time and are careful with them too. It doesn’t hurt to put in a few hours of practice time if you’ve never used these items before. What is more, you can create a wonderful label for GMO foods without too much trouble. Just ensure you take your time and have a few practice runs at it first.

It Can Be Cost-Effective

A lot of people think renting a hobby laser and making labels can be extremely costly and tend to forget the idea. However, creating labels for GMO foods can be very easy and not as expensive as you might think. Renting a laser engraving machine for a few hours can be very inexpensive and in the long-term it’ll be very effective. Labels are easy enough to create and shouldn’t take a lot of man power either so it is worth it to say the least.

Know what you’re consuming

Creating engraved labels can be incredibly easy, more so than you might have thought and it can be important to do so. With a few simple labels, you can know what you’re consuming and can see the differences between GMO and non-GMO foods. Genetically modified foods might not appeal to everyone and being able to identify them is crucial. With a Boss laser machine, engraving labels for GMO foods can be easy. continue reading on

Please follow and like us:
Continue Reading
Laser Machines

Engraved Labels to Differentiate GMO Foods

Who thinks of using a laser machine when it comes to labeling GMO foods? For most, they don’t really think its necessary and often think it’s a big waste of time. However, isn’t it important to know the differences between GMO foods and non-GMO? Of course it is and for most, it’s very important for them to be sure of what they’re eating. With engraved labels you can differentiate between GMO and non-GMO foods.

Why Do You Need Engraved Labels?

Do you know the difference in terms of looks between GMO and non-GMO foods? Surprisingly you cannot always tell the difference by looks and it is a cause for concern which is why more are using a co2 laser cutter to engrave special labels. This can be great if you’re in the food business or just sharing a home with others! Consuming GMO foods is a personal choice and it’s wise to label your foods just in case. Labels are going to make things far easier and aren’t all that difficult to create either.

Can You Really Get Your Labels To Standout With A Laser Engraver?

A lot of people think it isn’t necessary to make fancy engraved labels for certain foods and yet it can be very important to say the least. You need to know what you’re eating and it’s important to use the labels too. With a laser machine you can create lovely engraved labels and that way you and everyone else will know exactly what you’re eating. If you don’t want to eat genetically modified food, would you be happy to consume something simply because it wasn’t labeled correctly? Of course you wouldn’t and it’s very easy to use a laser engraver to create new labels. read top article here :

Make Your Labels an Effective Marketing Tool

If you run a business and you are supplying grown foods, you need to ensure people know what they’re eating. You can create some simple engraved labels to differentiate GMO foods and non-GMO foods. This is good for your customers and it can be a great marketing tool for your business too. Having an effective marketing tool such as this can be so useful and it’ll make all the difference too. With a co2 laser cutter you can create a great new set of labels to differentiate between GMO and non-GMO foods.

Get In The Know

Knowing the difference between GMO foods and non-GMO foods is not easy. If you haven’t had a hand in growing the items it can be very hard to tell the difference as foods can look very much the same when out of packaging. However, with engraved labels you can tell the difference between the two and it’s great whether you are setting up a grocery-type business or just sharing a home with a dozen other people. Knowing what you’re eating is important and knowing the differences between genetically modified food and non-genetically modified food is important. If you’re looking for a machine get in the know and review companies out there like Thunder Laser.  Why not use a laser machine to create some simple engraved labels; it will be well worth the money. check this out for more!

Please follow and like us:
Continue Reading